Contact Advantech Search Shopping list
  1. 0800-500-1055 FAX:03-6802-1023
  2. ログイン

PCI-1245-AE DSP-based 4-axis Stepping and Servo Motor Control Universal PCI Card

  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Position latch via ORG & index signal
  7. Position compare triggering up to 100 KHz, and memory buffer is up to 100K points in DSP
  8. Supports gantry mode by semi-closed loop pulse train control
  9. RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes
Certifications
RoHS CE
Please visit via PC to place order/quote

¥87,700

Specifications
Category
Attribute
Value
General
Connectors
1 x 100-pin SCSI female connector
General
Humidity (Operating)
5~95% RH (non-condensing)
General
Humidity (Storage)
5~95% RH (non-condensing)
Counter/Encoder Input
Counting Range
32-bit
Encoder Type and Interface
Counts per Enc. Cycle
x1, x2, x4 (A/B phase only)
Encoder Type and Interface
Input Range
0~1 VDC for low; 3.5~5 VDC for high
Encoder Type and Interface
Input Type
Quadrature (A/B phase) or up/down
Encoder Type and Interface
Max. Input Frequency
10 MHz under x4 A/B phase mode
Pulse Type Motion Control
Interpolation
2 to 4-axis linear, 2-axis circular, X-Y plane with Z thread helical interpolation
Pulse Type Motion Control
Max. Output Speed
5 Mbps
Pulse Type Motion Control
Motor Driver Support
Pulse-type servo/stepping
Pulse Type Motion Control
Pulse Output Type
Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
Pulse Type Motion Control
Step Count Range
±2, 147, 483, 646
Pulse Type Motion Control
Velocity Profiles
T-Curve, S-Curve
Frequency
Signal Input
Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC
Local I/O
General Input Signal
Input voltage: 24 VDC Max. Input delay: 100 us Max. (isolation delay) Signal: EMG (emergency stop) ORG, LMT+, LMT- INPOS (in position signal) LTC (counter latch) RDY (servo ready) ALARM (servo alarm)
Local I/O
General Output Signal
Output voltage: Open collect 24 VDC Max Output delay: 100 us Max. (isolation delay) Sink current: 100 mA per channel Signal: CMP (position compare in range output) SVON (servo on) RALM (reset driver alarm) ERC (counter clear signal)
Recommended Peripherals

オプション品

型番 説明 単価 数量
ADAM-3920-AE DINレール・マウント対応20ピン・フラット・ケーブル・ワイヤリング端子 ¥4,000
PCL-101100M-3E CABLE, SCSI-100 Shielded Cable, 3m ¥30,300
PCL-10120-1E IDC-20 フラットケーブル, 1m ¥1,300
PCL-10120-2E IDC-20 フラットケーブル, 2m ¥2,100
PCL-10251-1E SCSI-100 to 2*SCSI-50 Shielded Cable, 1m ¥10,800
PCL-10251-2E SCSI-100 to 2*SCSI-50 Shielded Cable, 2m ¥13,600
PCL-10251-3E PCI-1240,3M 100Pinから2つの 50Pin SCSICable ¥15,900
型番 数量
ADAM-3920-AE
DINレール・マウント対応20ピン・フラット・ケーブル・ワイヤリング端子
単価: ¥4,000
PCL-101100M-3E
CABLE, SCSI-100 Shielded Cable, 3m
単価: ¥30,300
PCL-10120-1E
IDC-20 フラットケーブル, 1m
単価: ¥1,300
PCL-10120-2E
IDC-20 フラットケーブル, 2m
単価: ¥2,100
PCL-10251-1E
SCSI-100 to 2*SCSI-50 Shielded Cable, 1m
単価: ¥10,800
PCL-10251-2E
SCSI-100 to 2*SCSI-50 Shielded Cable, 2m
単価: ¥13,600
PCL-10251-3E
PCI-1240,3M 100Pinから2つの 50Pin SCSICable
単価: ¥15,900
x
お問い合わせ

0800-500-1055 FAX:03-6802-1023

9:00-12:00, 13:00-17:30 (土日・祝日を除く)

Contact Advantech